Sharp Projector NV4 User Manual

Projector Instructions For SharpNV4

Step One:

The Sharp NV4 should contain 2 basic cords. Make sure all the cords are in the bag.

Cord #1: Plugs

into the projector

and the wall.

Cord #1:

Input 1 = RGB1

Cord #2: The second cord

plugs into the laptop and to

the projector (RGB1= port 1).

Cord #2

Plug to

Projector

Step Two:

Turn on the projector on first and then the laptop.

Page 1

“F3”

“Fn”

Step Six:

If you are still having problems call Marti at x5289, Lowell at x7679, Sue at x5189.

Page 3