State Industries Water Heater CSB 120 User Manual

COMMERCIAL  
SANDBLASTER  
COMMERCIAL ELECTRIC WATER HEATERS  
Designed for use as a recovery heater having its own storage tank. Note: Not recommended  
for sanitizing water application.  
MODELS  
CSB 52, 82, 120  
SURFACE MOUNT THERMOSTATS  
FEATURES  
Meets or exceeds the requirements of ASHRAE 90.1b-1992 and ASHRAE/IESNA 90.1-2004.  
GOLD ELEMENTS - CSB models ship with the gold plated elements (see element  
availability chart on back). Patented gold elements provide long life and superior scaling  
resistance. Low watt density means lower surface temperature to minimize scale buildup  
and more surface to heat water. Gold elements carry a one-year warranty against failure  
due to lime scale build-up.  
GLASS-LINED TANK - Three sizes: 50, 80 and 119 gallon capacity. Tank interior is  
coated with glass specially developed for water heater use. Tanks rated at 150 psi (1034  
kPa) working pressure (ASME 150 psi). Foam insulation reduces costly heat loss, and is  
vermin proof.  
FUSING - Protects all elements, thermostats, and internal wiring circuits against excess  
current flow. Meets National Electrical Code requirements that non-ASME tanks must  
have internal fusing when current draw exceeds 48 amps.  
STANDARD VOLTAGES - 208, 240 and 480V single-phase and three-phase delta.  
Convertible from three-phase to single-phase (in field) and vice versa. 277V single-phase  
also available.  
TERMINAL BLOCK - Factory installed. Just bring the service to the heater and connect to block.  
CONTROLS - One temperature control (adjustable through a range of 120° to 180°F)  
and manual reset high temperature cut-off per element. Thermostat step control may  
be achieved by varying settings on individual temperature controls. Located behind  
hinged control compartment door for quick, easy access.  
OTHER STANDARD FEATURES -  
Ŷ
Ŷ
Ŷ
Surface mounted thermostats  
Simplified circuitry, color coded for ease of service  
Ŷ
Two anode rods for maximum corrosion protection  
with baked enamel finish  
CSA / ASME temperature and pressure relief valve  
Cabinet has bonderized undercoat  
Brass drain valve  
Single panel control box. THREE  
Ŷ
Ŷ
Ŷ
Bottom inlet and top outlet openings  
Ŷ
Ŷ
YEAR LIMITED TANK WARRANTY - For complete warranty information, consult written  
warranty or contact State Water Heaters.  
(OPTIONAL)  
OPTIONS -  
Ŷ
UL and cUL listed conversion kits to adjust voltage and kW requirements in the field  
Ŷ
Ŷ
before and after installation ASME 150 psi tank construction International voltages -  
220, 380, 400, 415, 575, and 600 volts, three phase available with Y connected elements  
Ŷ
MANIFOLD KITS - for multiple tank installations. Two heaters -part # 9003429205,  
three heaters- part # 9003430205 and four heaters- part # 9003431205  
For more information on this product contact:  
State Water Heaters  
500 Tennessee Waltz Parkway, Ashland City, TN 37015  
800.365.0024 Toll-free USA  
SOLID.STATE.  
SCESS00508  
September 2010R  
 

Sharp Microwave Oven R 1850A User Manual
Sony Car Stereo System CDX L470X User Manual
Sony Cell Phone 1289 4869 User Manual
Sony Ericsson Cell Phone K530i User Manual
Sony Portable Speaker SS FCR655H User Manual
Speco Technologies Computer Monitor VM 1705C User Manual
Spirit Treadmill XT175 User Manual
Sunbeam Frozen Dessert Maker GL5500 User Manual
Sunbeam Microwave Oven SMW700 User Manual
Sunbeam Mixer 2484 User Manual